Difference between revisions of "What is the level"

From My Emotion
Jump to: navigation, search
(Created page with "Many people who do not belong to the construction industry do not know what leveling is and what it is used for. Simply put, a screed is a layer of material placed on a concre...")
 
(No difference)

Latest revision as of 16:41, 16 January 2020

Many people who do not belong to the construction industry do not know what leveling is and what it is used for. Simply put, a screed is a layer of material placed on a concrete floor, forming a flat, smooth surface on the final layer. Tile, rug, wood, linoleum, or other flooring.
Traditionally, this was made of the same material as cement, water and aggregate (usually sharp sand). Concrete aggregates are coarser for higher strength, while concrete granules are finer for smoother surfaces.
Choose the right office chair


Traditional screeds can be supplied on-site or already mixed. However, in both cases the treatment is manual. This literally means distributing hands and knees evenly over concrete with hand tools.
7 points to follow when choosing the best courier service in London
This can be associated, unassociated, or mobile. The adhesive layer is placed directly on the concrete or subsoil, the adhesive layer is placed on a layer of moisture-resistant film, first on the surface. It can also float when attached to insulation, as is often the case with floors with underfloor heating. In the latter case, there is a concrete surface on which the moisture barrier film is placed, in which the layer of insulation and the underfloor heating pipes are placed. This is applied as a finish.
The minimum thickness of the base used depends on the application. In general, the heavier the application, the thicker the leveling. For example, warehouses where forklifts operate all day require more frequent leveling than domestic situations. Usually, when traffic is heavy, it needs to be 25mm thick. When installed on underfloor heating pipes, it can reach 50mm or 65mm or more.
Commercial and corporate law
Of course, this all applies to traditional fillers, but recently more and more designers have used slightly different layers of liquid. It contains gypsum, and the screed is transported to a mixed construction site where it is sent to a surface, a moisture barrier, or a layer of insulation beneath the floor. Using liquid screed in Derbyshire has many advantages over traditional bases.
Last but not least, liquid screed can be applied much faster than hands or knees. Depending on the desired thickness, the liquid screed can cover an area of ​​100 square meters in just 45 minutes. Liquid screed can cover up to 2000 square meters per day.
However, there are other benefits to using Derbyshire fluidized beds, one of which is the thermal efficiency of underfloor heating. Liquid screeds are almost twice as effective as conventional thermal screeds. This means that the energy required to use underfloor heating saves 25-40% of the performance of a traditional screed. Therefore, as long as the building exists, the profit will last.
Liquid screeds can be adjusted to be thinner than concrete or sand bases to reduce weight and do not require reinforcement. In addition, it does not curl, minimizing the risk of cracking. Furthermore, shrinkage is almost impossible.
The liquid layer can be forced to dry after 7 days, walking after 24-48 hours. Traditionally, curing takes up to 90 days to make a final plan. This can lead to long-term local delays and financial consequences. Due to forced drying, liquid levels can be introduced 28 days after installation, saving two months.